Luminex 100 IS Version 2.2 - Manual (Page 61)

x MAP Technology Create Templates
PN 89-00002-00-032 Rev. A 55
Figure 39. Template Setup Wizard Dialog Box—Enter the
Number of Tests
8. Select the Tests field and enter the number of desired tests and
then press the Enter key. A blank entry for each test appears in
the adjacent area (each test represents an analyte bound to a
unique bead set).
9. Enter the Name, Units, and Description fields for each test. The
Apply Units button applies the same unit entered on the first line
to all other tests. See Figure 40.
In the Tests field,
enter desired
number of tests.