Luminex 100 IS Version 2.2 - Manual (Page 26)

Luminex 100 IS Developer Guide to x MAP Technology Version 2.2 x MAP Technology
20 PN 89-00002-00-032 Rev. A
14. Preliminary Off-Plate commands are performed before the first
selected well on the plate and are indicated by a green square in
the top left corner of the plate. To configure a Preliminary Off-
Plate command select Preliminary Off-Plate Cmd(s) from the
menu or right-click on the corner marker. The command list
dialog box appears similar to Figure 12. Double-click the desired
commands to select and click OK when done.
To clear Preliminary Off-Plate commands, right-click on corner
marker and select Clear Off-Plate Cmd(s). See Figure 10.
Figure 10. Preliminary Off-Plate Command Marker
An Insert Off-Plate command is performed after the selected
well and is indicated by a green background behind the well.
Table 5: Plate Layout Tab—Selection Shortcuts
Click column heading to select entire column.
Click row heading to select entire row.
Click the top left corner of the plate to select entire plate.
Each well can have a series of Off-Plate commands that run
before the next well is read.
You can insert preliminary Off-Plate commands that run
before the first well.
Corner marker turns green
to indicate Preliminary Off-
Plate command in effect
Right-click on corner
marker to display menu