Asus GigaX3124 - Manual (Page 99)

GigaX3124 Layer3 Switch CLI Command Reference
74
[IFNAME] Egress interface name
Command Mode Mac access-list extended mode
No/clear
no (permit|deny) MACADDR MASK any (cos <0-7> | vlan
<1-4094>) [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-mac-acl)# permit 0000.0000.0001 0000.0000.00ff
any cost 2 [gi1/0/1]
ASUS(config-mac-acl)# permit 0000.0000.0001 0000.0000.00ff
any vlan 10 [gi1/0/1]
12.8 (permit|deny) MACADDR MASK any vlan
<1-4094> cos <0-7> [IFNAME]
Syntax (permit|deny) MACADDR MASK any vlan <1-4094> cos <0-7>
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
MACADDR Source MAC address xxxx.xxxx.xxxx
MASK Source MAC address mask xxxx.xxxx.xxxx
any any destination Mac address
vlan IEEE 802.1Q VLAN
<1-4094> VLAN ID
cos Class of Service
<0-7> the priority value
[IFNAME] Egress interface name
Command Mode Mac access-list extended mode
No/clear
no (permit|deny) MACADDR MASK any vlan <1-4094> cos
<0-7> [IFNAME]
Show show access-lists [ACLNAME]