Asus GigaX3124 - Manual (Page 312)

GigaX3124 Layer3 Switch CLI Command Reference
287
Show show running-config
Default
Description
To set the OSPF administrative intra-area, inter-area or external
distance.
Examples ASUS(config-router)# distance ospf external 10
ASUS(config-router)# distance ospf intra-area 10 inter-area 10
external 10
25.26 ip ospf authentication
Syntax ip ospf authentication
Parameters authentication Enable authentication on this interface
Command Mode Interface configuration mode
No/clear
no ip ospf authentication
Show show running-config
Default
Description
To enable authentication for the specified interface.
Examples ASUS(config-if)# ip ospf authentication
25.27 ip ospf authentication message-digest
Syntax ip ospf authentication
Parameters authentication Enable authentication
message-digest Use message-digest authentication
Command Mode Interface configuration mode
No/clear
no ip ospf authentication
Show show running-config
Default
Description
To enable authentication and use message-digest to authenticate
for the specified area.
Examples ASUS(config-if)# ip ospf authentication