Asus GigaX3124 - Manual (Page 164)

GigaX3124 Layer3 Switch CLI Command Reference
139
13.50 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp IPADDR MASK
IPADDR MASK <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK IPADDR MASK <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear no
access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK IPADDR MASK <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp 10.0.0.1 0.0.0.0
10.0.0.4 0.0.0.0 1