Asus GigaX3124 - Manual (Page 189)

GigaX3124 Layer3 Switch CLI Command Reference
164
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp host IPADDR IPADDR MASK <0-255>
code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp host 10.0.0.1 10.0.0.2 0.0.0.0
2 code 2 [gi1/0/2]
13.83 (permit|deny) (ip|tcp|udp|icmp) IPADDR
MASK host IPADDR [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK host IPADDR
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK host IPADDR
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or