Asus GigaX3124 - Manual (Page 193)

GigaX3124 Layer3 Switch CLI Command Reference
168
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR [eq]
[<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any eq 12 host 10.0.0.1 eq 12
[gi1/0/2]
13.88 (permit|deny) icmp any host IPADDR <0-255>
code <0-255> [IFNAME]
Syntax (permit|deny) icmp any host IPADDR <0-255> code <0-255>
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
any any source address
host A single destination host
IPADDR Destination address
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any host IPADDR <0-255> code <0-255>