Asus GigaX3124 - Manual (Page 308)

GigaX3124 Layer3 Switch CLI Command Reference
283
Command Mode Config-router mode
No/clear
no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D
message-digest-key <1-255>
Show show running-config
Default
Description
To configure a virtual link router for the specified area and set the
message-digest key by key ID.
Examples ASUS(config-router)# area 0.0.0.2 virtual-link 10.1.1.2 message-
digest-key 1 md5 abcedfgh
25.17 auto-cost refrence-bandwidth <1-4294967>
Syntax auto-cost refrence-bandwidth <1-4294967>
Parameters reference-bandwidth Use reference bandwidth method to assign
OSPF cost
<1-4294967> The reference bandwidth in terms of Mbits per
second
Command Mode Config-router mode
No/clear
no auto-cost refrence-bandwidth
Show show running-config
Default
Description
To use the specified reference bandwidth value to decide cost
value. Must ensure reference bandwidth is consistent across all
routers
Examples ASUS(config-router)# auto-cost reference-bandwidth 10
25.18 compatible rfc1583
Syntax compatible rfc1583
Parameters
Command Mode Config-router mode
No/clear
no compatible rfc1583
Show show ip ospf
Default Not enable