Asus GigaX3124 - Manual (Page 94)

GigaX3124 Layer3 Switch CLI Command Reference
69
Description This command sets the Link Aggregation Control Protocol (LACP)
operation delete for the aggregation-link group ports on the
switch stack or on a standalone switch.
Example ASUS(config)# lacp aggregation-link group 2 delete gi1/0/4
11.3 lacp system-priority <1-65535>
Syntax lacp system-priority <1-65535>
Parameters system-priority LACP system priority
<1-65535> System priority value
Command Mode Global configuration mode
No/clear
no lacp system-priority
Show show lacp [GROUPID]
Default The default is 32768.
Description This command sets the system priority for the Link Aggregation
Control Protocol (LACP) on the switch stack or on a standalone
switch.
Example ASUS(config)# lacp system-priority 2000
11.4 show lacp [GROUPID]
Syntax show lacp [GROUPID]
Parameters [GROUPID] Aggregation-link group ID
Command Mode Privileged EXEC mode
Default
Description
Use the show lacp user EXEC command to display Link
Aggregation Control Protocol (LACP) channel-group information.
Example ASUS# show lacp 2