Asus GigaX3124 - Manual (Page 123)

GigaX3124 Layer3 Switch CLI Command Reference
98
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp 1.1.1.1 0.0.0.0 any
13.8 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) IPADDR MASK [eq]
[<0-65535>] any [eq] [<0-65535>] [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] any [eq] [<0-65535>] [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
any Any destination host
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] any [eq] [<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp 1.1.1.1 0.0.0.0 eq 23
any eq 22