Asus GigaX3124 - Manual (Page 202)

GigaX3124 Layer3 Switch CLI Command Reference
177
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any eq 2 10.0.0.1 0.0.0.0
[gi1/0/1]
13.99 (permit|deny) (tcp|udp) any IPADDR MASK
[eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) any IPADDR MASK [eq] [<0-65535>]
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
any any source address
IPADDR Destination address
MASK Destination wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any IPADDR MASK [eq] [<0-65535>]
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any 10.0.0.1 0.0.0.0 eq 2
[gi1/0/1]