Asus GigaX3124 - Manual (Page 152)

GigaX3124 Layer3 Switch CLI Command Reference
127
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK host IPADDR [eq] [<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp 1.1.1.1 0.0.0.0 host
1.1.1.4 eq 21
13.38 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) any IPADDR
MASK [eq] [<0-65535>] [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
any IPADDR MASK [eq] [<0-65535>] [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
any Any Source host
IPADDR destination address
MASK destination wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number