Asus GigaX3124 - Manual (Page 183)

GigaX3124 Layer3 Switch CLI Command Reference
158
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [eq] [<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp host 10.0.0.1 eq 655 host
10.0.0.2 eq 65 [gi1/0/2]
13.76 (permit|deny) icmp host IPADDR host
IPADDR [<0-255>] code [<0-255>] [IFNAME]
Syntax (permit|deny) icmp host IPADDR host IPADDR [<0-255>] code
[<0-255>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address
host A single destination host
IPADDR Destination address
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp host IPADDR host IPADDR [<0-255>]
code [<0-255>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or