Asus GigaX3124 - Manual (Page 204)

GigaX3124 Layer3 Switch CLI Command Reference
179
<0-65535> Port number
any any destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] any [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any eq 2 any [gi1/0/1]
13.102 (permit|deny) (tcp|udp) any [eq]
[<0-65535>] host IPADDR [IFNAME]
Syntax (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
.any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR
[IFNAME]