Asus GigaX3124 - Manual (Page 106)

GigaX3124 Layer3 Switch CLI Command Reference
81
Command Mode Mac access-list extended mode
No/clear
no (permit|deny) MACADDR MASK MACADDR MASK (cos
<0-7> | vlan <1-4094>) [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-mac-acl)# permit 0000.0000.0001 0000.0000.00ff
0000.0000.0002 0000.0000.00ff cos 2[gi1/0/2]
ASUS(config-mac-acl)# permit 0000.0000.0001 0000.0000.00ff
0000.0000.0002 0000.0000.00ff vlan10 [gi1/0/2]
12.17 (permit|deny) MACADDR MASK MACADDR
MASK vlan <1-4094> cos <0-7> [IFNAME]
Syntax (permit|deny) MACADDR MASK MACADDR MASK vlan
<1-4094> cos <0-7> [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
MACADDR Source MAC address xxxx.xxxx.xxxx
MASK Source MAC address mask xxxx.xxxx.xxxx
MACADDR Destination MAC address xxxx.xxxx.xxxx
MASK Destination MAC address mask xxxx.xxxx.xxxx
vlan IEEE 802.1Q VLAN
<1-4094> VLAN ID
cos Class of Service
<0-7> the priority value
[IFNAME] Egress interface name
Command Mode Mac access-list extended mode
No/clear
no (permit|deny) MACADDR MASK MACADDR MASK vlan
<1-4094> cos <0-7> [IFNAME]
Show show access-lists [ACLNAME]