Asus GigaX3124 - Manual (Page 63)

GigaX3124 Layer3 Switch CLI Command Reference
38
4 IEEE 802.1Q VLAN Configuration
4.1 name VLANAME
Syntax name VLANAME
Parameters VLANNAME Characters name
No/clear no name
Command Mode Config-vlan mode
Show
show vlan [VLANID]
Default “VLAN” + “VLANID”, ex: VLAN20
Description Use the name command to set the vlan name on the switch.
Example ASUS(config)# vlan 20
ASUS(config-vlan)# name outvlan
4.2 show vlan [VLANID]
Syntax show vlan [VLANID]
Parameters [VLANID] VLAN ID
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
Use the show vlan user EXEC command to display the
parameters for all configured VLANs or one VLAN (if the VLAN
ID specified) on the switch.
Example ASUS# show vlan 2
4.3 show vlan name VLANAME
Syntax show vlan name VLANAME
Parameters VLANAME vlan name
Command Mode Privileged EXEC mode