Asus GigaX3124 - Manual (Page 246)

GigaX3124 Layer3 Switch CLI Command Reference
221
quiet-period: 60 seconds
server-timeout: 20 seconds
Description This command sets the dot1x reauthentication timer.
Example ASUS(config-if)# dot1x timeout reauth-period 3600
18.9 dot1x host-mode (multi-host| single-host)
Syntax dot1x host-mode (multi-host| single-host)
Parameters multi-host Enable multiple-hosts mode on the switch
single-host Enable single-host mode on the switch
Command Mode Interface configuration mode
No/clear
no dot1x host-mode
Show show dot1x / show dot1x interface IFNAME
Default single-host
Description Allow multiple hosts (clients) on an 802.1X-authorized port.
Example ASUS(config-if)# dot1x host-mode multi-host
18.10 dot1x authentic-method (local | radius)
Syntax dot1x authentic-method (local | radius)
Parameters local Use the local username database for authentication
radius Use the Remote Authentication Dial-In User Service
(RADIUS) servers for authentication
Command Mode Global configuration mode
No/clear
no dot1x authentic-method
Show show dot1x authentic_method
Default radius
Description Specify the authentic method for dot1x.
Example ASUS(config)# dot1x authentic-method radius