Asus GigaX3124 - Manual (Page 297)

GigaX3124 Layer3 Switch CLI Command Reference
272
“Version 2” will not be displayed whether or not Version 2 is set
explicitly as the version of RIP being used. The version can be
specified globally, and also on a per-interface basis (see below).
Examples ASUS(config-router)# version 1
24.19 show ip rip
Syntax show ip rip
Parameters
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
The command displays all RIP routes. For routes that are
received through RIP, this command will display the time the
packet was sent and the tag information. This command will also
display this information for routes redistributed into RIP.
Examples ASUS# show ip rip
24.20 show ip rip status
Syntax show ip rip status
Parameters
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
The command displays current RIP status. It includes RIP timer,
filtering, version, RIP enabled interface and RIP peer information.
Examples ASUS# show ip rip status