Asus GigaX3124 - Manual (Page 217)

GigaX3124 Layer3 Switch CLI Command Reference
192
13.119 (permit|deny) IPADDR [IFNAME]
Syntax (permit|deny) A.B.C.D [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
IPADDR Host address
[IFNAME] Egress interface name
Command Mode IP standard access-list mode
No/clear
no (permit|deny) host IPADDR [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-std-acl)# permit 10.0.0.1 [gi1/0/1]
13.120 show ip access-group [IFNAME]
Syntax show ip access-group [IFNAME]
Parameters IFNAME interface name
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
Show ip access rule to attach with the specific interface
Examples ASUS# show ip access-group gi1/0/1
13.121 show ip access list
Syntax show ip access list
Parameters
Command Mode Privileged EXEC mode
No/clear