Asus GigaX3124 - Manual (Page 122)

GigaX3124 Layer3 Switch CLI Command Reference
97
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp 1.1.1.1 0.0.0.0 1.1.1.3
0.0.0.0 22 code 3
13.7 access-list (<100-199>|<2000-2699>)
(deny|permit) (ip|tcp|udp|icmp) IPADDR
MASK any [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) IPADDR MASK any [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
any Any destination host
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) IPADDR MASK any [IFNAME]
Show show access-lists [ACLNAME]