Asus GigaX3124 - Manual (Page 154)

GigaX3124 Layer3 Switch CLI Command Reference
129
any any [eq] [<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp any any eq 21
13.40 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) any [eq] [<0-65535>]
any [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
any [eq] [<0-65535>] any [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
any Any Source host
eq Match only packets on a given port numbe
<0-65535> Port number
any Any destination host
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
any [eq] [<0-65535>] any [IFNAME]
Show show access-lists [ACLNAME]
Default