Asus GigaX3124 - Manual (Page 255)

GigaX3124 Layer3 Switch CLI Command Reference
230
rising-threshold VALUE falling-threshold VALUE <1-65535>
[OWNER]
Parameters <1-65536> Specify the alarm number
OID The MIB object, 1.3.6.1.2.1.16.1.1.1.5.1 for etherStatsPkts
of port 1
<1-4294967295> The time interval of alarm monitor, in seconds
absolute To test each MIB variable directly
delta To test the change between samples of a MIB variable
VALUE The rising threshold value, the range is -2147483648 to
2147483647
VALUE The falling threshold value, the range is -2147483648 to
2147483647
<1-65535> Specify the RMON event to trigger when falling
threshold exceeds
[OWNER] Specify the owner of this RMON alarm
Command Mode Global configuration mode
No/clear
no rmon alarm <1-65536>
Show show rmon alarms
Default
Description
To add rmon alarm entry
Examples ASUS(config)# rmon alarm 33 1.3.6.1.2.1.16.1.1.1.5.1 10 delta
rising-threshold 10000 falling-threshold 1000 10 tester
20.3 rmon alarm <1-65536> OID <1-4294967295>
(absolute|delta) rising-threshold VALUE
<1-65535> falling-threshold VALUE [OWNER]
Syntax rmon alarm <1-65536> OID <1-4294967295> (absolute|delta)
rising-threshold VALUE <1-65535> falling-threshold VALUE
[OWNER]
Parameters <1-65536> Specify the alarm number
OID The MIB object, 1.3.6.1.2.1.16.1.1.1.5.1 for etherStatsPkts
of port 1