Asus GigaX3124 - Manual (Page 199)

GigaX3124 Layer3 Switch CLI Command Reference
174
13.95 (permit|deny) (tcp|udp) IPADDR MASK any
[eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) IPADDR MASK any [eq] [<0-65535>]
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
any any destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) IPADDR MASK any [eq] [<0-65535>]
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp 10.0.0.1 0.0.0.0 any eq 22
[gi1/0/1]
13.96 (permit|deny) (tcp|udp) IPADDR MASK [eq]
[<0-65535>] host IPADDR [IFNAME]
Syntax (permit|deny) (tcp|udp) IPADDR MASK [eq] [<0-65535>] host
IPADDR [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.