Asus GigaX3124 - Manual (Page 302)

GigaX3124 Layer3 Switch CLI Command Reference
277
Command Mode Config-router mode
No/clear
no area (A.B.C.D| <0-4294967295>) range A.B.C.D/M substitute
A.B.C.D/M
Show show running-config
Default
Description
To set the summarizing routes range and substitute network
prefix for the specified area.
Examples ASUS(config-router)# area 0.0.0.2 range 192.192.0.0/16
substitute 192.190.0.0/24
25.8 area (A.B.C.D| <0-4294967295>) shortcut
(default| enable| disable)
Syntax area (A.B.C.D| <0-4294967295>) shortcut (default| enable|
disable)
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
shortcut Configure the area’s shortcutting mode
default Set default shortcutting behavior
disable Disable shortcutting through the area
enable Enable shortcutting through the area
Command Mode Config-router mode
No/clear
no area (A.B.C.D|<0-4294967295>) shortcut (enable|disable)
Show show ip ospf
Default
Description
To set shortcut mode for the specified area.
Examples ASUS(config-router)# area 0.0.0.2 shortcut disable
25.9 area (A.B.C.D| <0-4294967295>) stub
Syntax area (A.B.C.D| <0-4294967295>) stub