Asus GigaX3124 - Manual (Page 243)

GigaX3124 Layer3 Switch CLI Command Reference
218
Command Mode Interface configuration mode
No/clear
no dot1x port-control
Show show dot1x / show dot1x interface IFNAME
Default The default is ForceAuthorized
Description Use the dot1x port-control interface configuration command on
the switch stack or on a standalone switch to enable manual
control of the authorization state of the port. Use the no form of
this command to return to the default setting.
Example ASUS(config)# interface gi1/0/1
ASUS(config-if)# dot1x port-control auto
18.3 dot1x radius server A.B.C.D KEY [PORT]
Syntax dot1x radius server A.B.C.D KEY [PORT]
Parameters A.B.C.D IP address
KEY RADIUS key
[PORT] RADIUS port
Command Mode Global configuration mode
No/clear
Show
show dot1x radius / show running-config
Default
Description
This command sets the radius server IP, radius key, and radius
port for 802.1X configuration.
Example ASUS(config)# dot1x radius server 192.192.1.1 testing 1812
18.4 dot1x radius secondary-server A.B.C.D KEY
[PORT]
Syntax dot1x radius secondary-server A.B.C.D KEY [PORT]
Parameters A.B.C.D IP address
KEY RADIUS key
[PORT] RADIUS port