Asus GigaX3124 - Manual (Page 295)

GigaX3124 Layer3 Switch CLI Command Reference
270
24.15 route A.B.C.D/M
Syntax route A.B.C.D/M
Parameters A.B.C.D/M IP address/netmask
Command Mode Config-router mode
No/clear
no route A.B.C.D/M
Show show ip rip
Default
Description
To set a RIP static route.
Examples ASUS(config-router)# route 192.192.3.0/24
24.16 router rip
Syntax router rip
Parameters
Command Mode Global Configuration mode
No/clear
no router rip
Show show ip rip status
Default
Description
The router rip command is necessary to enable RIP. To disable
RIP, use the no router rip command. RIP must be enabled before
carrying out any of the RIP commands.
Examples ASUS(config)# router rip
24.17 timers basic <5-2147483647> <5-2147483647>
<5-2147483647>
Syntax timers basic <5-2147483647> <5-2147483647>
<5-2147483647>
Parameters basic Basic routing protocol update timers
<5-2147483647> Routing table update timer. Default is 30
second
<5-2147483647> Routing information timeout timer. Default is