Asus GigaX3124 - Manual (Page 119)

GigaX3124 Layer3 Switch CLI Command Reference
94
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 99 permit any
13.4 access-list (<100-199>|<2000-2699>)
(deny|permit) (ip|tcp|udp|icmp) IPADDR
MASK IPADDR MASK [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) IPADDR MASK IPADDR MASK [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) IPADDR MASK IPADDR MASK [IFNAME]
Show show access-lists [ACLNAME]
Default