Asus GigaX3124 - Manual (Page 209)

GigaX3124 Layer3 Switch CLI Command Reference
184
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR IPADDR MASK [eq]
[<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp host 10.0.0.1 10.0.0.2 0.0.0.0
eq 2 [gi1/0/1]
13.108 (permit|deny) (tcp|udp) host IPADDR
[eq] [<0-65535>] any [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] any
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
host A single source host
IPADDR Source address.
eq Match only packets on a given port numbe
<0-65535> Port number
any any destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] any
[IFNAME]
Show show access-lists [ACLNAME]
Default