Asus GigaX3124 - Manual (Page 187)

GigaX3124 Layer3 Switch CLI Command Reference
162
host A single source host
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
IPADDR Source address
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (ip|tcp|udp|icmp) host IPADDR IPADDR MASK
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp host 10.0.0.1 10.0.2.0 0.0.0.255
[gi1/0/2]
13.81 (permit|deny) (tcp|udp) host IPADDR [eq]
[<0-65535>] IPADDR MASK [eq] [<0-65535>]
[IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] IPADDR
MASK [eq] [<0-65535>]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
host A single source host
IPADDR Source address