Asus GigaX3124 - Manual (Page 214)

GigaX3124 Layer3 Switch CLI Command Reference
189
MASK Destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any IPADDR MASK <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp any 10.0.0.1 0.0.0.0 2
[gi1/0/1]
13.115 (permit|deny) icmp any any [<0-255>]
[IFNAME]
Syntax (permit|deny) icmp any any [<0-255>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
any any source address
any any destination address
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any any [<0-255>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp any any 2 [gi1/0/1]