Asus GigaX3124 - Manual (Page 182)

GigaX3124 Layer3 Switch CLI Command Reference
157
host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (ip|tcp|udp|icmp) host IPADDR host IPADDR
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp host 10.0.0.1 host 10.0.0.25
[gi1/0/1]
13.75 (permit|deny) (tcp|udp) host IPADDR [eq]
[<0-65535>] host IPADDR [eq]
[<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [eq] [<0-65535>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
host A single source host
IPADDR Source address
eq Match only packets on a given port numbe
<0-65535> Port number
host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number