Asus GigaX3124 - Manual (Page 219)

GigaX3124 Layer3 Switch CLI Command Reference
194
14 Storm control:
14.1 storm-control (broadcast| dlf| multicast)
<1-262143>
Syntax storm-control (broadcast| dlf| multicast) <1-262143>
Parameters broadcast Broadcast rate control
multicast Multicast rate control
dlf Unknown unicast rate control
<1-262143> Rate limit value in packets per second
Command Mode Interface Configuration mode
No/clear
no storm-control (broadcast| dlf| multicast)
Show show storm-control (broadcast| dlf| multicast)
Default
Description
Use the storm-control configuration command on the switch
stack or standalone switch to set the limit rate of the interface’s
total bandwidth used by broadcast/dlf/multicast.
Example ASUS(config-if)# storm-control multicast 4096
14.2 show storm-control (broadcast| dlf| multicast)
Syntax show storm-control (broadcast| dlf| multicast)
Parameters broadcast Broadcast rate control
multicast Multicast rate control
dlf Unknown unicast rate control
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
Use the show storm-control configuration command on the
switch stack or standalone switch to show the limit rate of the
port’s total bandwidth used by broadcast/dlf/multicast.
Example ASUS# show storm-control dlf