Asus GigaX3124 - Manual (Page 150)

GigaX3124 Layer3 Switch CLI Command Reference
125
MASK Source wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
any Any destination host
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] any [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp 1.1.1.1 0.0.0.0 eq 21
any
13.36 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) IPADDR MASK [eq]
[<0-65535>] host IPADDR [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] host IPADDR [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR source address
MASK source wildcard bits
eq Match only packets on a given port numbe