Asus GigaX3124 - Manual (Page 303)

GigaX3124 Layer3 Switch CLI Command Reference
278
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
stub Configure OSPF area as stub
Command Mode Config-router mode
No/clear
no area (A.B.C.D| <0-4294967295>) stub
Show show ip ospf
Default
Description
To configure the specified area as stub.
Examples ASUS(config-router)# area 0.0.0.2 stub
25.10 area (A.B.C.D| <0-4294967295>) stub no-
summary
Syntax area (A.B.C.D| <0-4294967295>) stub no-summary
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
stub Configure OSPF area as stub
no-summary Do not inject inter-area routes into stub
Command Mode Config-router mode
No/clear
no area (A.B.C.D| <0-4294967295>) stub no-summary
Show show ip ospf
Default
Description
To configure the specified area as stub and not inject inter-area
routes.
Examples ASUS(config-router)# area 0.0.0.2 stub no-summary