Asus GigaX3124 - Manual (Page 130)

GigaX3124 Layer3 Switch CLI Command Reference
105
13.15 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp any any <0-255>
code <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
any <0-255> code <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
any Any Source host
any Any destination host
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
any <0-255> code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp any any 2 code 3