Asus GigaX3124 - Manual (Page 324)

GigaX3124 Layer3 Switch CLI Command Reference
299
26 VRRP (Virtual Router Redundancy
Protocol):
26.1 show standby [IFNAME]
Syntax show standby [IFNAME]
Parameters [IFNAME] L3 interface name
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
To show VRRP running status and configuration for all enabled
L3 interface or specified L3 interface.
Example ASUS(config)# show standby vlan2
26.2 standby <1-255> ip IPADDR
Syntax standby <1-255> ip IPADDR
Parameters <1-255> Virtual router ID
ip Virtual router IP parameter
IPADDR IP address
Command Mode Interface configuration mode
No/clear
no standby <1-255> ip IPADDR
Show show standby [IFNAME]
Default Not enable
Description Use the command to set Virtual router ID and address, and also
enable VRRP. The interface must be a L3 interface
Example ASUS(config)# interface vlan2
ASUS(config)# standby 1 ip 192.192.1.254