Asus GigaX3124 - Manual (Page 89)

GigaX3124 Layer3 Switch CLI Command Reference
64
9 Port Mirroring Configuration:
9.1 mirror session <1-2> destination IFNAME
Syntax mirror session <1-2> destination IFNAME
Parameters IFNAME Interface name
Command Mode Global configuration mode
No/clear
no mirror session <1-2>
Show show mirror session
Default Not enable this function
Description To set monitor port in mirror mode
Example ASUS(config)# mirror session 1 destination gi1/0/1
9.2 mirror session <1-2> source IFLIST (both| rx|
tx)
Syntax mirror session <1-2> source IFLIST (both| rx| tx)
Parameters IFLIST Interface list
both Ingress+egress mirrored
rx Ingress mirrored
tx Egress mirrored
Command Mode Global configuration mode
No/clear
no mirror session <1-2> source IFLIST
Show show mirror session
Default No mirror rule is setting
Description This command mirrors the source interface list traffic to the
destination interface. The mirror type support received traffic,
transmitted traffic, or both.
Example ASUS(config)# mirror session 1 source gi1/0/2-4,gi1/0/7 rx