Asus GigaX3124 - Manual (Page 201)

GigaX3124 Layer3 Switch CLI Command Reference
176
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) IPADDR MASK host IPADDR [eq]
[<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp 10.0.0.1 0.0.0.0 host 10.0.0.2
eq 2 [gi1/0/1]
13.98 (permit|deny) (tcp|udp) any [eq] [<0-65535>]
IPADDR MASK [IFNAME]
Syntax (permit|deny) (tcp|udp) any [eq] [<0-65535>] IPADDR MASK
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] IPADDR MASK
[IFNAME]
Show show access-lists [ACLNAME]