Asus GigaX3124 - Manual (Page 136)

GigaX3124 Layer3 Switch CLI Command Reference
111
Description This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp host 1.1.1.1 eq 21
1.1.1.4 0.0.0.0 eq 22
13.21 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp host IPADDR IPADDR
MASK <0-255> code <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp host
IPADDR IPADDR MASK <0-255> code <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single Source host
IPADDR Source address
IPADDR destination address
MASK destination wildcard bits
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
host IPADDR IPADDR MASK <0-255> code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.