Asus GigaX3124 User Manual

Page 194

GigaX3124 Layer3 Switch CLI Command Reference

169

[IFNAME]

Show

show access-lists [ACLNAME]

Default
Description

This command specifies one or more conditions denied or

permitted to decide if the packet is forwarded or dropped.

Examples

ASUS(config-ext-acl)# permit icmp any host 10.0.0.1 2 code 2

[gi1/0/2]

13.89 (permit|deny) (ip|tcp|udp|icmp) any IPADDR

MASK [IFNAME]

Syntax

(permit|deny) (ip|tcp|udp|icmp) any IPADDR MASK [IFNAME]

Parameters

permit Specify packets to forward

deny Specify packets to reject.

ip Any Internet Protocol

tcp Transmission Control Protocol

udp User Datagram Protocol

icmp Internet Control Message Protocol

any any source address

IPADDR Destination address

MASK Destination wildcard bits

[IFNAME] Egress interface name

Command Mode IP extended access-list mode
No/clear