Asus GigaX3124 - Manual (Page 299)

GigaX3124 Layer3 Switch CLI Command Reference
274
Examples ASUS(config-router)# area 0.0.0.2 authentication message-
digest
25.3 area (A.B.C.D| <0-4294967295>) default-cost
<0-16777215>
Syntax area (A.B.C.D| <0-4294967295>) default-cost <0-16777215>
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
default-cost Set the summary-default cost of a NSSA or stub
area
<0-16777215> Stub’s advertised default summary cost
Command Mode Config-router mode
No/clear
no area (A.B.C.D| <0-4294967295>) default-cost <0-16777215>
Show show running-config
Default
Description
To set advertised default summary cost for the specified stub
area.
Examples ASUS(config-router)# area 0.0.0.2 default 100
25.4 area (A.B.C.D| <0-4294967295>) range
A.B.C.D/M
Syntax area (A.B.C.D| <0-4294967295>) range A.B.C.D/M
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
range Summarize routes matching address/mask (border
routers only)
A.B.C.D/M Area range prefix
Command Mode Config-router mode