Asus GigaX3124 - Manual (Page 168)

GigaX3124 Layer3 Switch CLI Command Reference
143
IPADDR Source address
IPADDR destination address
MASK destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
host IPADDR IPADDR MASK <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp host 10.0.0.1
10.0.0.4 0.0.0.0 1
13.55 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp host IPADDR host
IPADDR <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp host
IPADDR host IPADDR <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single Source host
IPADDR Source address
host A single destination host
IPADDR Destination address