Asus GigaX3124 - Manual (Page 230)

GigaX3124 Layer3 Switch CLI Command Reference
205
No/clear no set ip precedence
Show show policy-map [POLICYMAP]
Default
Description
This command is used to set classified ingress packets with
packet IP Precedence values.
Examples ASUS(config-pmap-class)# set ip precedence 3
16.14 service-policy input POLICYMAP
Syntax service-policy input POLICYMAP
Parameters POLICYMAP Policy map specific name
Command Mode Interface configuration mode
No/clear
no service-policy input POLICYMAP
Show show policy-map [POLICYMAP]
Default
Description
This command is used to apply a specific policy map to a
particular interface.
Examples ASUS(config)# interface gi1/0/1
ASUS(config-if)# service-policy input pm1
16.15 show policy-map [POLICYMAP]
Syntax show policy-map [POLICYMAP]
Parameters [POLICYMAP] Policy map specific name
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
This command is used to show the policy-map configuration.
Examples ASUS# show policy-map