Ds1874 sfp+ controller with digital ldd interface – Rainbow Electronics DS1874 User Manual
Page 73
DS1874
SFP+ Controller with Digital LDD Interface
______________________________________________________________________________________
73
Table 02h, Register C4h: DAC2TI
FACTORY
DEFAULT
00h
READ ACCESS
PW2 or (PW1 and RWTBL246) or (PW1 and RTBL246)
WRITE ACCESS
PW2 or (PW1 and RWTBL246)
MEMORY TYPE
Nonvolatile (SEE)
C4h 2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
BIT
7
BIT
0
DAC2 temperature index defines the TempCo boundary for the DAC2 LUT. The DAC2TC bit (Table 02h, Register
C6h) defines the polarity of the TempCo. This value is compared with the adjusted memory address used during
the LUT recall, not the value in the TINDEX register (Table 02h, Register 81h).
DAC2TI
=
Temp _ Value
+ 40°C
4
°C
+ 80h
FACTORY
DEFAULT
00h
READ ACCESS
PW2 or (PW1 and RWTBL246) or (PW1 and RTBL246)
WRITE ACCESS
PW2 or (PW1 and RWTBL246)
MEMORY
TYPE Nonvolatile
(SEE)
This register is reserved.
Table 02h, Register C5h: RESERVED