Rainbow Electronics DS1874 - Manual (Page 41)

DS1874
SFP+ Controller with Digital LDD Interface
______________________________________________________________________________________ 41
Lower Memory, Register 6Fh: UPDATE
POWER-ON VALUE 00h
READ ACCESS All
WRITE ACCESS All and DS1874 Hardware
MEMORY TYPE Volatile
6Fh TEMP RDY VCC RDY MON1 RDY MON2 RDY MON3 RDY MON4 RDY RESERVED RSSIR
BIT 7 BIT 0
BITS 7:2
Update of completed conversions. At power-on, these bits are cleared and are set as each conversion is
completed. These bits can be cleared so that a completion of a new conversion is verified.
BIT 1 RESERVED
BIT 0
RSSIR: RSSI Range. Reports the range used for conversion update of MON3.
0 = Fine range is the reported value.
1 = Coarse range is the reported value.