TC Electronic Broadcast 6000 - Manual (Page 59)

VSS™ SR
English Manual 55
VSS™ SR
The VSS™ SR (Surround) algorithm is a unique
room simulator with new facilities for 4:2:4 sur-
round production. The diffused field of the simu-
lation is turned into a Front/Rear composition
with separate Decay, Level and Predelay param-
eters for front and rear.
The composite Output of the simulator is com-
patible with mono, stereo and surround repro-
duction.
When used for surround production a surround
encoder is not needed, but monitoring should
be done through a Dolby SR compatible decod-
ing system.
The VSS™ SR algorithm occupies:
– @ Normal Sample Rate: 1/4 DSP Resource
– @ Double Sample Rate: 1/4 DSP Resource
The inputs and outputs of this algorithm are dis-
tributed as follows:
Input Output
S1
E1
E2
E3
E4
L
S2 R
VSS™ SR algorithm – main page
VSS™ SR algorithm – main page
Front Decay
Range: 0.01 to 20 s
Changes the Decay time of the mono information
in the signal.
Front Delay
Range: 0 to 200 ms
Changes the Reverb Feed Delay time of the
Front/Center information in the signal.
Rear Decay
Range: 0.01 to 20 s
Changes the Decay time of the stereo informa-
tion in the signal.
Rear Delay
Range: 0 to 200 ms
Changes the Reverb Feed Delay time of the
Rear/Surround information in the signal.
Pre Delay
Range: 0 to 100 ms
A delay placed at the Input of the algorithm. This
parameter specifies the time between the source
material and the beginning of the Early Reflec-
tions.
Levels