TC Electronic Broadcast 6000 - Manual (Page 57)

VSS™ M4
English Manual 53
Reverb Lo/HiCut
Lo Cut
Range: 20 Hz to 200 Hz
Determines the Lo Cut frequency. Attenuation
amount is controlled via the Lo Damp parameter.
Lo Damp
Range: 0 to -18 dB
Attenuation amount of frequencies below the Lo
Cut setting.
Hi Cut
Range: 20 Hz to 20 kHz
Determines the Hi Cut frequency.
Hi Soften
Range: -50 to +50
Hi Soften is a complex filter used to shape the
high frequency spectrum of the Reverb diffused
field. Hi Soften is scaled with Hi Cut and Hi De-
cay. A setting of “0” denotes a default setting.
Decay
Lo Decay
Range: 0.01 to 2.5
Decay multiplier related to Master Decay, for fre-
quencies below the Lo Xover setting.
Example: When a Decay multiplier is set at 1.25
and the Master Decay is 2.0 sec the resulting de-
cay time will be 2.5 seconds.
LoMid Decay
Range: 0.01 to 2.5
Decay multiplier related to Master Decay, for fre-
quencies above the Lo Xover setting.
Example: When a Decay multiplier is set at 1.25
and the Master Decay is 2.0 sec the resulting de-
cay time will be 2.5 seconds.
HiMid Decay
Range: 0.01 to 2.5
Decay multiplier related to Master Decay, for fre-
quencies above the Mid Xover setting.
Example: When a Decay multiplier is set at 1.25
and the Master Decay is 2.0 sec the resulting de-
cay time will be 2.5 seconds.
Hi Decay
Range: 0.01 to 2.5
Decay multiplier related to Master Decay, for fre-
quencies above the Hi Xover setting.
Example: When a Decay multiplier is set at 1.25
and the Master Decay is 2.0 sec the resulting de-
cay time will be 2.5 seconds.
Lo Xover
Sets the Cross-over frequency between the Lo
and LoMid Decay.
Mid Xover
Sets the Cross-over frequency between the Lo-
Mid and HiMid Decay.
Hi Xover
Sets the Cross-over frequency between the Hi-
Mid and Hi Decay.