TC Electronic Broadcast 6000 - Manual (Page 45)

VSS™ 5.1 Source
English Manual 41
Center Channel
Range: Off/On/Phantom On
This parameter enables on/off setting of the
Center speaker in the two multi-channel setups.
The Phantom setting is a patent pending feature
that makes the Center speaker integrate with the
Left/Right front speakers more properly than a
standard configuration.
Global Level Options
Kill-Dry
Range: On/Off
When set to “on” no dry signals are passed
through the algorithm. This affects the Dry Level
parameters for each of the four Source Inputs,
only to be adjustable when set to off.
Distance Simulation
Range: On/Off (On sets the Levels to 0 dB).
This parameter changes the perceived distance
between the listening position and the source. To
achieve the Distance Simulation, the direction of
the source is maintained while the Early Reflec-
tion pattern is carefully adjusted according to the
source level.
VSS™ 5.1 Source
algorithm – view page
VSS™ 5.1 Source algorithm – view page
At this page the Location type is selected. Lis-
tening- and Source- positions can be placed in
different places. Number and placement of posi-
tions will vary according to the selected Output
mode (Setup page) as well as Location type.
– Listening position is marked with a Triangle.
– Available Source-positions are marked with
dots.
– Selected Source-positions are marked with a
yellow dot and numbers.
Location Type
Range: Different Locations.
Changes the Location-type, meaning both the
Early Reflections and Reverb settings.
Positions
Listening Position
In some large locations it’s possible to change
the listeners position. In the smaller locations
there is one listening position available.
Source 1 to 4 positioning
In the selected location it is possible to posi-
tion the four Input sources individually. Different
numbers of positions are available, depending
on the location type and Output format.
VSS™ 5.1 Source algorithm
– sources page
VSS™ 5.1 Source algorithm – sources page
This page contains individual parameters for
each of the four sources.
Source 1 to 4
Various parameters are available for each of the
4 source positions. Press Source 1 to 4 to se-
lect which set of source parameters you wish to
adjust.