TC Electronic Broadcast 6000 - Manual (Page 46)

VSS™ 5.1 Source
42 System 6000 MKII Algorithms
Source 1 to 4 Early Reflections
Lo Color
Range: ±50
Adjusts the low frequency spectrum for the se-
lected Source.
Hi Color
Range: ±50
Adjusts the high frequency spectrum for the se-
lected Source.
Early Start
Range: 0 to 100 %
Sets the starting point of the initial taps in the
Early Reflection pattern (The shortest taps).
The parameter range limit will be less than 100
% if the Early Stop parameter is set to anything
other than 0 %.
Early Stop
Range: 100 to 0 %
Removes taps in the Early Reflection pattern
from the end of the pattern.
The parameter range limit will be less than 100
% if the Early Start parameter is set to anything
other than 0 %.
Reverb Position
Enables to emphasize or change the Source po-
sition origin in the Reverb part of the algorithm.
Source 1 to 4 Levels
ER Level
Range: -100 to 0 dB
Adjusts the level of the Early Reflection for the
source.
Reverb Level
Range: -100 to 0 dB
Adjusts the level of the source contribution to the
five Reverb Tails.
Dry Level
Range: -100 to 0 dB
Adjusts the level of Dry signal from the source.
In Level
Range: -100 to 0 dB
Adjusts the overall Input level from the source.
VSS™ 5.1 Source algorithm
– reverb page
VSS™ 5.1 Source algorithm – reverb page
At the Reverb page you access Color and Decay
parameters for the five reverb diffuse fields.
Reverb Colors
Lo Color
Range: ±50
Adjusts the spectral balance in the low end fre-
quencies of the Reverb. All five diffuse fields re-
spond to this parameter.
Mid Color
Range: ±50
Adjusts the spectral balance in the mid-range
frequencies of the Reverb. All five diffuse fields
respond to this parameter.
Hi Color
Range: ±50
Adjusts the spectral balance in the high end fre-
quencies of the Reverb. All five diffuse fields re-
spond to this parameter.
Surround Channel Colors (Additive)
Lo Color
Range: ±50
Additional Color adjustment of the Surround
channels. Adjusts the spectral balance in the
low-end frequencies of the Reverb.