TC Electronic Broadcast 6000 - Manual (Page 209)

VP-8
English Manual 205
Factor/Adjust
Range: 1, 10 or 100
The Factor parameter is a multiplier factor for the
Adjust handles. Use the Adjust handles to fine-
tune the transpose value.
Pitch Splicing
The Splicing parameters are used to optimize
how the pitch brains compute the splice points.
If very short Delay times are used, audio quality
trade-offs must be expected.
Delay – Ch. 1 to 4 and 5 to 8
Range: 0 to 100 %
Sets the maximum delay used for pitch change
purposes.
If low processing Delay is important, this pa-
rameter should be set at minimum value when
listening for splicing artifacts passing the lowest
expected audio frequency.
The Delay found at the Main page adds to the
Max Delay.
Splice Size – Ch. 1 to 4 and 5 to 8
Range: 0 to 100 %
Sets the maximum timing variation allowed when
the pitch brain looks for perfect splice points.
If splicing intervals have to be kept constant, this
control should be turned towards low values.